Reasons for causing unevenness on the surface of synthetic resin tiles

After understanding the reasons for the unevenness of synthetic resin tiles, it is necessary to maintain them and take preventive measures against these possible causes. Below, resin tile manufacturers, plastic steel tile manufacturers, and PVC tile manufacturers will discuss the following aspects to prevent unevenness.

1. Resin tiles should be made of high-quality boards.

2. The keel should be straight and should not be distorted or have horizontal through section knots.

3. The method of installing resin tiles should be leveled by drawing lines on the surrounding walls according to the design elevation. When nailing, the horizontal line should be used as the reference, and the arching height of the horizontal line should be 1/200 of the short span of the room. The longitudinal arching should be evenly distributed.

4. Resin tiles should use the national standard of 3.0mm as much as possible, and the distance between purlins should be 660m.