The fixing method of plastic steel tiles

Below, resin tile manufacturers, plastic steel tile manufacturers, and PVC tile manufacturers will talk about the fixing methods of plastic steel tiles.

Plastic steel tiles need to be fixed during equipment operation to ensure construction quality and safe use. However, there are multiple fixed methods that need to be determined based on the actual equipment situation.

The plastic steel tiles are fixed with aluminum profile fasteners, and the corrugated PVC plastic steel tiles are fixed with PVC plastic steel tile brackets and self tapping screws, and then sealed with glue. The orientation is generally set at the mid span.

The connection between plastic steel tiles and self tapping screws must have a cover plate. Hot and cold deformation is significant, and it is easily cut by self tapping nails. Therefore, plastic steel tiles should have larger holes at the location where self tapping nails are installed. When using PVC plastic steel tiles for equipment, consideration should be given to their flexibility.

Each purlin and tile should be equipped with two sets of accessories evenly, and it is necessary to fix the accessories on the wave crest.

At the longitudinal edge of the tile, each wave peak should be fixed to the purlin with accessories, and reinforcement methods should be used in windy areas.

The selection of fixing methods and the quality of the application of plastic steel tiles are very important, so it is necessary to strictly grasp them during construction, take every detail seriously, and ensure the construction quality and application effect.