Construction methods and principles of plastic steel tiles

Plastic steel tiles have good waterproof function, thermal insulation function, flame retardant function, and corrosion resistance function, and are widely used in workshops, factories, carports, especially chemical plants and other corrosive work. Of course, in order for it to have good applicability, the construction method is very important.

Below, resin tile manufacturers, plastic steel tile manufacturers, and PVC tile manufacturers will talk about the construction methods and principles of plastic steel tiles:

First, drill a hole with an electric drill, and then fix the plastic steel tile with a hook nail. The hole diameter should be 2mm larger than the hook nail rod diameter. Tighten the hook nail, and the tightness of the screw cap should be moderate, not too tight. When cutting, use a fine toothed saw. If drilling the wrong hole, use adhesive to repair it. When overlapping the two tiles, press 10cm longitudinally and half a tile horizontally. The height to span ratio of the roof truss is 1:5-1:6. The distance between the sandalwood strips should not exceed 80cm for those below 2.0mm, and 100cm for those between 2.0-3.0mm.

The correct construction method and high-quality plastic steel tiles enable them to fully play their role.