Construction methods and principles for PVC tiles

PVC tiles have good waterproof performance, good thermal insulation, good flame retardancy, and good corrosion resistance. They are widely used in workshops, factories, carports, especially in corrosive occupations such as chemical plants. Of course, in order for it to have good applicability, the construction method is very important.

Below, resin tile manufacturers, plastic steel tile manufacturers, and PVC tile manufacturers will talk about the construction methods and principles of PVC tiles:

First, drill a hole with an electric drill, and then fix the PVC tile with a hook nail. The hole diameter should be 2mm larger than the hook nail rod diameter. Tighten the hook nail, and the tightness of the screw cap should be moderate, not too tight. When cutting, use a fine toothed saw. If drilling the wrong hole, use adhesive to repair it. When overlapping two tiles, press 10cm longitudinally and press one and a half tiles horizontally. The height span ratio of the roof truss is 1:5-1:6. The spacing between the sandalwood strips should not exceed 80cm for those below 2.0mm, and 100cm for those between 2.0-3.0mm.

The correct construction method and high-quality PVC tiles enable them to fully play their role.